|
The MATRIX-1000
V2 is a complete sound reinforcement SOLUTION comprised of two 10”
two-way powered satellites and a dedicated powered 15” subwoofer. The
MATRIX-1000 V2 has a built-in three-channel 700-watt power amplifier,
three distinct volume controls, electronic crossover with equalization
and VCA compressor. The circuitry is designed and fine-tuned to
integrate all components for the best possible sound. There is no need
to tweak or finesse settings on a crossover or compressor to make your
system sound great. Simply roll the system into place on its heavy duty
casters, plug in the AC, connect the two speaker cables, run two XLR
cables to your mixer and you’re ready to go!
V2 UPGRADES: THE BEST JUST GOT
BETTER
• A new high-performance compression driver for a smoother frequency
• response and lower distortion throughout the upper midrange
frequencies.
• A new elliptical wave guide with more uniform dispersion.
• The addition of a voltage controlled amplifier (VCA) on all three
amplifier
• channels to minimize the effects of amplifier clipping. This lowers
the
• maximum distortion produced at VERY high drive levels and offers
additional
• protection for the speaker components.
• More durable FREE dust cover.
• Improved B-52 handles.
SUGGESTED
APPLICATIONS:
Mobile DJ * Karaoke * Nightclub, Restaurant, Bar Install * Corporate
Audio / Video * Home Entertainment System * Live Sound System * Stage
Monitoring System * Booth Monitoring System * Drum Monitoring
BUILT-IN 3-CHANNEL AMPLIFIER
The 15" subwoofer enclosure is divided into two separate compartments.
The front chamber serves as the cabinet for the 15" subwoofer. The rear
chamber houses all of the systemís electronic circuitry, which includes
the amplification for all three components, power supply and preamps.
The 15î subwoofer has a power handling capability of 400 watts and a
nominal impedance of 8 ohms.
 10"
SATELLITE SPEAKERS
The MATRIX-1000 V2 satellites are loaded with a custom designed
10” speaker and 1” titanium diaphragm compression driver. The
“horn” is a 900 by 600 elliptical waveguide that can be rotated
900 to optimize the dispersion pattern to best suit your particular
application. These versatile speakers are pole-mountable
and can sit as stage monitors. They alsoinclude 3/8” – 16tpi flying hardware for small venue permanent
installations. The rounded front of the satellite speaker is a perfect
fit for the convex face of the subwoofer, allowing a mobile entertainer
to stack, roll and transport the entire
MATRIX-1000 V2 in and out of a venue in record time.
 TRANSPORTING
THE SYSTEM
To transport the MATRIX-1000 V2, simply set the subwoofer on its casters
and place the satellite speakers on to the subwoofer’s front panel,
facing down. Fasten the satellites with the included locking strap using
the handles on either side of the subwoofer cabinet. Place the included
cover over the entire system and you’re ready to move the
MATRIX-1000 V2 with ease.
SPECIFICATIONS:
700-WATT 3-CHANNEL AMPLIFIER
|
Subwoofer Power Output
10” Two-way Power Output
Line in:
Parallel out:
Input Impedance:
Speaker Out:
Power Requirement:
|
400 W
150 W
XLR Female
XLR Male
48 k Ohms
Speakon NL4 Style Connector
115V<>50/60Hz<>10A
230V<>50/60Hz<>6A |
15"
SUBWOOFER
|
Speaker:
Nominal Impedance:
Subwoofer Freq. Response:
Sound Pressure Level (1w/1m):
Max. SPL:
Weight:
Dimensions (Transport):
|
15î Custom Built B-52 Subwoofer
8 Ohms
40 Hz; 120 Hz +/- 3dB
102 dB (half space)
127 dB @1% THD
120 lbs
28î (H) x 19î (W) x 23î (D) |
10'
TWO-WAY SPEAKERS
|
Speaker Input:
LF/MF Woofer:
HF Driver:
HF Dispersion:
Nominal Impedance:
Active Freq. Response:
Crossover Frequency (passive):
Sound Pressure Level (1w/1m):
Max. SPL:
Weight:
Dimensions (Upright):
|
Speakon style connector
(pin 1+ = +, pin 1- = -)
10” Custom Built B-52 Transducer
1” Titanium Diaphragm
90 x 60
4 Ohms
120 – 19K Hz +/- 3dB
2.5 kHz; 12 dB / Octave
101 dB (half space)
124 dB @10% THD
30 lbs
19” (H) x 12” (W) x 11” (D) |
COMPLETE SYSTEM
|
Weight:
Dimensions (Transport):
|
180 lbs
39î (H) x 19î (W) x 23î (D) |
As always, the
very impressive B-52 standard warranty:
Lifetime warranty on cabinet construction
Lifetime warranty on high-frequency devices
Five-year warranty on loudspeakers
Two-year warranty on amplifiers
--KpoDJ
recommends B-52 Pro-Audio speakers and subs over any other company due
to their performance and price. We list all our B-52 products at their
M.A.P. (the lowest price they can legally be sold for). B-52 does NOT
honor any warranties from customers who purchased their equipment from a
dealer with prices below MAP.
See more information on our B-52
products: B-52 Technical
Information Regular Price: $1,799.99
Our Price: $849.99 (FREE shipping within the 48 states) | 
