The new RMX Series amplifiers
give you clean, dynamic power with the legendary QSC sound quality and
reliability that pros depend on. The RMX Series delivers unmatched
performance at a new breakthrough price.
Muscular Power Plant
The power supply is the heart of an amplifier, converting raw AC power
from the wall to clean DC for the audio circuitry. The RMX uses a
powerful high-current toroidal transformer and ample filter capacitance
to ensure generous energy reserves. This makes a critical difference in
sound quality, allowing the amp to effortlessly punch out high-level
transients, even when driving abusive 2-ohm speaker loads.
Superior Performance
RMX amplifiers deliver true studio-quality sound. A full, complementary
output circuit using the highest-grade linear output devices delivers
ultra-low distortion (<0.05% THD) and a ruler-flat frequency response.
SMT (Surface Mount Technology) triples small-signal component density,
enabling us to pack up to 2400 watts of power in a chassis only 2 rack
spaces and less than 16 in. deep. And unlike other designs, RMX output
devices are direct-mounted to the heat sink for optimum thermal coupling
and cooling.
Features
The RMX Series is packed full of professional features that increase
performance and flexibility:
Independent defeatable clip limiters reduce distortion without
sacrificing peak performance.
Selectable low-frequency filters boost system response, protect speakers
and ensure low-end tightness by more precisely matching the amplifier's
range to the loudspeakers.
Barrier strip, XLR, and 1/4 in. balanced inputs plus Speakon and binding
post outputs provide easy connections.
Low-noise variable speed fans with rear-to-front air flow keep
amplifiers and racks cool.
Proven Reliability
With over 30 years of building amplifiers for the largest touring
companies and venues around the world, you can count on QSC's reputation
for designing the most reliable amps available.
Technical Description
Specifications
Continuous Power Rating
8 Ohms: 500 W
4 Ohms: 750 W
2 Ohms: 1200 W
8 Ohms Bridged Mono: 1500 W
4 Ohms Bridged Mono: 2400 W
Current Consumption: 10 Amps
Distortion (Typical):
20 Hz-20 kHz: 10 dB below rated power Less than 0.03% THD 4 and 8 ohms
1.0 kHz and below: full rated power Less than 0.03% THD 4 and 8 ohms
Frequency Response: 20 Hz-20 kHz, +/- 1 dB, -3 dB points: 5 Hz-50 kHz
Damping Factor, 1 kHz and below: Greater than 300 at 8 ohms
Input Impedance: 10 k ohms unbalanced, 20 k ohms balanced
Input Clipping: 10 Vrms (+22 dB)
Cooling: Continuously variable-speed fan, rear-to-front air flow
Connectors, each channel
Input: Active balanced; barrier strip, XLR and 1/4 in. (6.3mm) TRS tip
and XLR pin 2 positive
Output: touch-proof binding posts and Neutrik Speakon
Controls
Front: AC switch, Ch. 1 and Ch. 2 gain knobs
Rear: 10-position DIP switch
Indicators
Power On: Green LED
Signal: Yellow LED, 1 per channel
Clip: Red LED, 1 per channel
Amplifier Protection:
Full short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into reactive or mismatched loads
Load Protection: On/off muting, AC coupling (850, 1450), triac crowbar
(2450, on each channel)
3-year warranty plus 3-year extended service contract All of our
QSC products are listed at MAP (the lowest price that the merchandise
can legally be sold for). QSC does NOT honor any warranties
from customers who purchased their equipment from a dealer with prices
below MAP.
$25 Rebate - Click
here for details
Regular Price: $999.99
Our Price: $629.00 (FREE shipping within the 48 states) |
