1,600W/ch @ 2 ohms, 1,200W/ch @ 4 ohms, 650W/ch @ 8 ohms, 3,200W bridged mono @ 4 ohms, 2,400W bridged mono @ 8 ohms.
The XTI Series of Crown amplifiers are professional tools designed and built for portable PA applications. All are rugged, lightweight, and feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, delay, a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan assisted cooling, XLR inputs, Speakon©, and binding-post outputs, short-circuit protection and more.
Crown XTi 4000 Power Amplifier Specifications:
- Voltage Gain at 1kHz, 8 ohm rated output:
- XTi 1000: 30.5dB _XTi 2000: 32.9dB_XTi 4000: 34.2dB
Frequency Response: ±0.25 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms
Phase Response (at 1 watt, 20 Hz to 20 kHz): ±15°
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode
Sensitivity: 1.4V
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): _105 dB (A weighted).
Damping Factor: Better than 500 from 20 Hz to 500 Hz.
Crosstalk: > 80 dB below rated power, 20 Hz to 1 kHz.
Common Mode Rejection (CMR): > 45 dB from 20 Hz to 1 kHz._Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical
AC Line Voltage and Frequency Configurations Available: 100V, 120V, 220-240V _50/60 Hz
AC Line Current: - XTi 1000: 6.5A_XTi 2000: 6.9A_XTi 4000: 8.0A
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
DSP Section
EQ: 4-band paragraphic per channel, boost/cut ±12 dB. Also adjustable high and low shelving filters
Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24 dB per octave. High and low shelving filters, one per channel
Delay: For signal alignment of driver; 5 mS total delay
Subharmonic Synthesizer: Adds low-frequency content
Output limiter: Prevents clipping
Presets: 10 user speaker presets
Front Panel Controls and Indicators
Level: Detented rotary level control, one per channel
Power Switch: On/off switch applies AC power to the amplifier
Sel/Prev/Next Buttons: Three buttons near the LCD screen are used to access menu items
LCD Screen: Backlit liquid crystal display shows speaker presets
Signal Indicator: Green LED, one per channel, flashes when a very low-level signal is present at input
10 Indicator: Green LED flashes when output signal exceeds 10 dB below clip.
20 Indicator: Green LED flashes when output signal level exceeds 20 dB below clip
Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion
Temp/Fault Indicator: Red LED, one per channel, illuminates under Fault or excessive temperature conditions
Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power
Rear Panel Controls and Connectors
AC Line Connector: NEMA 5-15P (15A)
Input Connector: XLR, one per channel
Link/Out Connector: Loop-thru signal from input connector for linking
Crown XTi 4000 Power Amplifier Features:
- Integrated proprietary DSP with LCD front panel display
- Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
- Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
- Extremely versatile, handling a wide range of speaker impedances and outputs
- Switch-mode universal power supply
- Speaker presets for crossover frequencies, EQ, limiting, and delay
- All products fill 2U rack spaces and weigh under 17 pounds
- Speakon© and binding post outputs, XLR inputs and loop-thrus
- Comprehensive LED status per channel
- 3-year, no-fault, fully-transferable warranty
We carry the full line of Crown. If you need an amplifier that is not listed on our website, check here: http://www.crownaudio.com/amps.htm and call for a price.
FREE VIP Accounts for 10-40% OFF!
- Step 1: Create a FREE KPODJ Account:Click Here
- Step 2: Ask for a FREE VIP Upgrade: Contact us
- Step 3: Enjoy
KPODJ is a family owned store created by DJ's, for DJ's. We separate ourselves from the competition
by focusing sales on HELPING customers...not negotiations. The VIP discount login is a way to guarantee
this for our customers. Simply log-in and start viewing the deepest discounts on EVERY product we carry.
Without being forced to request discounts, negotiate, and waste very valuable time, just log-in. We absolutely,
120% guarantee that our prices will be hands down, THE BEST on the planet. But that is not what we think sales
should be about. Our sales reps are here to educate our customers and help them find the best products for their needs.
Aside from a few DJ packages that we put together ourselves with deep discounts built-in and a few items
we carry with almost no room to discount, a VIP account will offer 10-40% discounts on almost every product
we carry, and up to 70% off accessories.
The activate your VIP account, you MUST contact a sales rep directly by phone or EMail. It is against
manufacturer policies to offer automated discount pricing below certain minimum advertised prices....plus, we want to hear from you!
Buy Now. Pay Later.
Need Financing? (Payments as low as $28.96 /month)
Need gear to make money...but
need money to get the gear? No problem! We offer some of the
best financing rates out there. Click the link below to
apply for financing.
Sometimes it takes
money to make money. We can help! Check out our financing
options below.
Free Lay-Away Program
- -FREE to use
- -No credit checks
- -No penalties for missing a payment
- -Pay as little or as much as you want at a time & we ship when paid off
- -No minimum order
Call 877-775-7635 to get set up today.
Business Financing
- -Some of the best financing rates and highest approval rates around!
- -ANY business or ANY end-user who owns a business checking account can
apply
- -Get your equipment now and spread out low monthly payments over several
years
- -$1,000 minimum order
Click here to
submit application
