Description
Building on the foundation...
Of the Com-Tech® Series, Crown's CTs Series offers new flexibility and
value for installed sound applications. The Com-Tech Series were the
first to offer independent selection of high- and low-impedance
operation for a specific channel, and CTs Series amplifiers continue
that tradition, with power levels and features carefully chosen to
perfectly integrate into fixed install design requirements.
Features:
- High power density. All two channel models and four channel
model in a 2RU chassis, eight channel model in a 3RU chassis
- New Crown Switching Power Supply for lighter weight
- Selectable "Constant-Voltage" or low-impedance (4/8 ohm)
operation per channel on 2-channel models, and per channel-pair on
4-and 8-channel models
- 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs
8200
- Legendary Crown class I (BCA) and AB+B output topologies offer
the best in amplifier reliability
- 4- and 8-channel models offer perfect independent power
solutions for multi-zoned systems· New "FIT" (Fault Isolation
Topology) circuitry on 4- and 8-channel models isolates fault
conditions without affecting neighboring channels
- Comprehensive array of indicators provide accurate diagnostics
- Two-channel models are fully PIP2-compatible. Multi-channel
models accept new MC accessory modules
2-ohm
Dual (per ch.) 150W 4-ohm Dual (per ch.) 300W 8-ohm Dual (per ch.) 300W
16-ohm Dual (per ch.) 300W 70V Dual (per ch.) 300W 4-ohm Bridge 300W
8-ohm Bridge 600W 16-ohm Bridge 600W 140V Bridge 600W
CTs 600 Performance:
Frequency Response (at 1 watt, 20Hz - 20 kHz) ±0.25 dB
Phase Response (at 1 watt, 10Hz - 20 kHz) ±20°
Signal to Noise Ratio below rated power (20 Hz to 20 kHz) <-105 dB
A-weighted
Total Harmonic Distortion (THD) at 1 watt, from 20 Hz to 20 kHz
<0.05%
Damping Factor 10 Hz to 400 Hz >500
Crosstalk (below rated power, 20 Hz to 1 kHz) >80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz) >50 dB
DC Output Offset (Shorted input) <10 mV
Input Impedance nominally balanced, nominally unbalanced 20 k ohms,
10 k ohms Maximum Input Level (before input compression) +20 dBu
Load Impedance (Note: Safe with all types of loads):
Stereo 2, 4, 8 and 16 ohms (70V)
Bridge Mono 4, 8, 16 and 32 ohms (140V)
Voltage Gain (at maximum level setting), 1.4V sensitivity:
4/8 Ohm Operation 36:1 (31 dB)
70V Operation 39:1 (32 dB)
100V Operation
Required AC Mains 120V 60 Hz, 220/230/240V/50 Hz Power Draw at Idle
(120VAC mains):
All channels in 4/8 ohm mode 24W (Standby Mode)
All channels in 70V mode 24W (Standby Mode)
Cooling Variable-speed forced air Dimensions:
Width, 19 in. (48.3 cm.)
Height, 3.5 in. (8.9 cm.)
Depth 14 in. (35.6 cm.)
Net Weight 24 lb (10.9 kg)
All of our
Crown products are listed at MAP (the lowest price that the merchandise
can legally be sold for). Crown does NOT honor any warranties
from customers who purchased their equipment from a dealer with prices
below MAP.
$275 Rebate - Click
here for details
Regular Price: $1299.99
Our Price: $1,211.00 (FREE shipping within the 48 states) |
