The MATRIX-200 is the newest member of the popular B-52
MATRIX family of active systems. Compact, powerful and portable the MATRIX-200
delivers clean, accurate sound ideal for both stage and music playback
applications. The MATRIX-200 has a true 200-watt stereo amplifier, built in
5-channel mixer, studio-quality digital effects, phantom power and numerous
patch inputs / outputs.
SUGGESTED APPLICATIONS:
Mobile DJ * Karaoke * Nightclub, Restaurant, Bar Install * Corporate Audio /
Video * Home Entertainment System * Live Sound System * Stage Monitoring System
* Booth Monitoring System
BUILT-IN DSP EFFECTS
• Eight built-in high quality DSP effects
• • * Level control to mix processed signal
• •with main signal
• • *
INPUT/MASTER switch to route effects
• • to either Master section or to
• • individual channels
• Powerful routing to combine optional
•outboard
effects with internal DSP effects
24-BIT DIGITAL EFFECTS
The MATRIX-200 includes a
24-bit, 8-position digital effects loop, that allows you to incorporate DSP
controlled and digitally generated effects into your mix. Effects offer a wide
range of "environments" to
choose from including:
•
Chorus
•
Chorus/reverb
•
Slapback
•
Echo
•
Large room
•
Small room
•
Small hall
•
Large hall
Speaker Outputs: Two full-range outputs of 100 watts each. The outputs
are equalized to optimize the acoustic output of the MATRIX-200 satellite
speakers.
Subwoofer Output: Switchable XLR balanced output allows you to
add a subwoofer to extend the low frequency output. The sub switch must be in
the OFF position if a subwoofer is not used. The switch ON position reduces the
low frequency output of
the full range stereo outputs.
Headphone: A 1/4” TRS phone jack stereo output is included for
monitoring by headphone.
XLR INPUTS WITH PHANTOM POWER
The XLR microphone inputs are
designed for use with
low-impedance |Z| microphones or equipment that has a mic-level balanced output
(direct-out). The balanced mic inputs include a 15 Volt DC phantom power source
allowing the use of condenser microphones. Dynamic microphones can also be used
with these connectors as the 15 Volts DC is too low to disturb their normal
operation.
STEREO POWER AMPLIFIER FEATURES
• Output stage with discrete
devices,
• not integrated IC amps
• Output power of 2 x 100w RMS with high headroom
• Comprehensive amplifier and speaker protection
• circuitry to guard against short circuits, DC
offsets,
• over-heating, turn-on thumps, subsonic and
• supersonic frequencies.
• Built-in stereo clip limiter
• Equalization customized to enhance and optimize
• speaker system performance.
• Output for stereo headphones on rear panel
• Very efficient cooling, utilizing a large heatsink
• and two direct flow fans
• Power supply with low-noise torodial transformer
• and a dual voltage (115/230Vac) selector switch
LOUDSPEAKERS
• Dual 6.5" drivers optimized
for Di'Ippolito configuration
• (one speaker high, one low)
• 1” exit phenolic tweeter on exponential horn to match
• acoustic response of 6.5" drivers
FIVE CHANNEL MIXER
FEATURES
|
• Four channels
with both balanced XLR mic inputs
and unbalanced ¼” jack line level inputs
• • *
15Vdc phantom
power on balanced XLR inputs
• • *
for
condenser microphones
• • *
PAN, TONE and
EFFECT LEVEL controls on
• • *
each
channel
• One stereo input channel for stereo sources
• • *
Dual input with
¼” TRS Jack and 3.5mm Jack
• *
to connect
any 2-channel source
• • *
Dedicated mono ¼”
Jack INSTRUMENT input
• *
with
frequency response contoured for
• *
acoustical
instruments
• • *
PAN/BALANCE, TONE
and EFFECT controls
|
• Low distortion, low
noise circuitry
• PLAYBACK input/output RCA connectors with
LEVEL control
• PATCH section to connect optional external processors,external
effects, and foot switch
• 3-band MASTER EQ section
• XLR subwoofer output and SUB switch on rear
panel to connect a powered subwoofer |
COMPLETE SYSTEM
Dimensions: 20” (W) x 32“
(H) x 15” (D)
Weight (lbs): 80
| 
