Turbosound's 1,000-Watt iX15 is a powered two-way loudspeaker ideally suited for a wide range of portable - and fixed - music and speech sound reinforcement applications. The driver complement features a 15" low frequency driver with a low mass voice coil for improved transient response, and an aluminum voice coil loaded 1" titanium dome compression driver for extended high frequency reproduction.

Equipped with a 2-channel mixer that can be controlled locally using the single-knob user interface, the iX15 also features wireless remote control capability via dedicated iPhone and iPad apps. An efficient and lightweight Klark Teknik Class-D power amplifier provides the iX15's bi-amplified 1,000-Watt output.

A sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP) provides dynamic EQ for impressive full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels - and long-term reliability. Additionally, the iX15 includes DSP presets that have been optimized for a wide range of applications and speaker orientations.

On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display and single rotary encoder for intuitive access to level, EQ, and frequency response presets for pole or stand-mounted front of house, or floor monitor scenarios. In addition to the two combination balanced XLR/jack inputs, an XLR Output is provided for daisy-chaining more active loudspeakers, or for use with an active subwoofer. The Turbosound iX15 also features high-quality stereo Bluetooth audio connectivity - allowing you to stream music wirelessly from a Bluetooth-enabled device, such as your iPad or iPhone. The dedicated app even allows the user to define one iX15 as the master, and the other as the slave - so the music stream is presented in true stereo.

The iX15 is fitted with a dual angle pole mount socket, allowing it to be pole mounted straight on, or raised higher and angled downwards to optimize audience coverage. The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations.

Features:
Full range, bi-amped loudspeaker for portable PA and installation applications
1,100 Watt power featuring KLARK TEKNIK Class-D technology
KLARK TEKNIK Digital Signal Processing for total system control
Total remote control via Apple iPhone/iPad*
High quality Bluetooth* stereo audio streaming
Remote control 2 channel mixer with gain setting recall
DSP presets for application type and speaker orientation
15" low frequency driver with low mass voice coil for improved transient response
Titanium dome 1" compression driver with pure aluminum voice coil for extended high frequency reproduction
Intuitive single-knob user interface with LCD display for ease of navigation
Lightweight fibre glass reinforced composite enclosure
Rugged powder coated perforated steel  mesh grille
Dual angle pole mount for accurate audience coverage
Multiple internal rigging points for installation applications
3-Year Warranty Program**
Designed and engineered in England

Specifications:

System
Frequency Response: 45 Hz - 20 kHz +/- 3 dB
                                  39 Hz - 20 kHz -10 dB
Nominal dispersion: 75° x 55°V @ -6dB points
Maximum SPL: 126 dB peak
Crossover type: Active
Transducers: 1 x 15" (387 mm) LF driver
                    1 x 1" (25.4mm) HF compression driver
Limiter: Independent HF, LF

Amplifier
Maximum output power: 1000 W
Type:
LF: Class-D
HF: Class AB
Protection: Short circuit, open circuit, thermal

Connectors
Input A/B: 2 x combo jack / XLR
Sensitivity for max out with volume control at 0 dB: + 4 dBu
Input impedance: 16 kOhm unbalanced, 33 kOhm balanced
Maximum input level: +22 dBu
Output: XLR, servo-balanced
Output impedance: 220 Ohm unbalanced, 600 Ohm balanced
Mains Supply: IEC mains connector with integrated power switch

Controls
Hardware: Rotary push-encoder
Software: IOS Interface via Bluetooth
User DSP Functions
Factory EQ presets: Positioning, Sound mode, Phase
Display: LCD 128 x 32, blue, backlit
Equalization: Bass and treble controls
Crossover: High pass L-R 24 dB/oct
Protection: Lock-out function for all settings

Bluetooth Wireless Technology
Frequency Range: 2402 MHz ~ 2480 MHz
Channel Number: 79
Version: Bluetooth 4.0 dual mode
Output: 8 dBM
Compatibility: Supports A2DP 1.2 profile, BLE
Maximum Communication Range: 80 m (without interference)
Connectivity: Master-slave: stereo pairing link

Power Supply
Power consumption: 80W @ 1/8 max power

Enclosure
Dimensions (HWD): 711 x 450 x 381 mm (27.9x17.7x15.0")
Net weight: 22.4 kg (49.4 lbs)

Turbosound IX15 (TurboSound ix-15)