Allen & Heath XONE 464


  
 When Allen & Heath decided to build a club mixer, they wanted to satisfy club techs and DJs alike. Xone:464 naturally shares its construction methods with A&H pro touring desks, so venues can depend on it for outstanding audio and reliability. Its unique analogue filters and 4 band asymmetric EQ also make it an incredibly creative tool that DJs really enjoy using. A&H also included a set of 4 fully featured mic/line inputs, which is great for venues running small live sets as well as DJs, or for those pioneering artists who are mixing live and recorded sources.

Features:

4 Mono Inputs XLR or TRS jack connector, gain, 4 band EQ with swept mids, HPF @ 100Hz, 6 aux sends (1-4 pre, 5&6 switchable pre/post fader), pan, peak signal led, cue and on button with led. 100mm long throw fader. Insert point and direct output on TRS jack

6 Dual Stereo Channels 2 stereo sources (A & B) per channel. A is on RCA for all channels with RIAA preamps on CH 5,6,9,10. B inputs are line in on RCA CH 5 & 10 and TRS on CH 6,7, 8 & 9. Access to all 6 auxes is at the top of the channels, leaving performance area clear. 3 colour bar meter and gain control. Powerful 4 band EQ with on switch. 60mm fader and X-fade assign section Stereo Mix Outputs 2 independent mix outputs with level controls, 12 segment 3 colour led metering and insert

Balanced XLR plus secondary RCA outputs, plus selectable mono out also on XLR and TRS. CH1-4 feed mix1 or mix2. Stereo channels feed mix1 direct or via the X-fader. Mix1 can route to mix2 6 Auxiliary Sends 6 aux sends to [TRS] outputs for monitors or FX sends. Mic / line CH 1-4 have individual sends and stereo CH 5-10 have aux 1&2 individual mono sum and auxes 3&4, 5&6 paired with L to odd, R to even. Aux sends 1-4 are always prefade, while auxes 5&6 are switchable pre/post fader

Additional controls allow aux sends to track the X-fader post fade 4 Stereo 2 Mono Mix1, mix2, post x-fader aux 3&4 and 5&6 can provide stereo mixes on rotary controls. Post x-fader aux 1 & aux 2 can

Zone Outs provide mono mix outputs with level controls 4 Band EQ Mono channels have 2 swept frequency mids. Stereo channels have EQ-on switch and all frequency sections have +6dB boost to preserve headroom and -26dB cut for creative mixing VCA Cross Fader Conductive plastic, high quality 45mm Penny & Giles fader with curve switchable to cut or dip. Stereo channels can be assigned to X (left) side with green led indication or Y (right) side with yellow led. VCA operation means wear and tear does not affect audio. Drop-in replacements. Pan trim control for imbalance Voltage Controlled Filters 2 filters [1 for each side of the x-fader] with choice of High Pass, Band Pass, Low Pass or multiples e.g. notch. Resonance control - adjusts Q from ‘mild to wild’. Sweep controls from 100Hz to 20kHz with blue led on switch External Input TRS jack inputs via level control to mix1, mix2 or monitor Engineer / DJ's Toolbox 2 high powered headphone outputs with level. Booth output on TRS with level

Monitor section has 8-way switch bank to select monitor source. 12 segment 3 colour bar metering. Channel cue overrides the monitor selected in the phones [and booth if Cue Enable is pressed]. Split Cue sends cue signals to left and selected program to right. Mute kills local monitor output [option for -20dB action]. Mono sum button for phase and compatibility check PSU High performance internal switched-mode power supply

Universal mains input voltage Configuration Options Internal links: mono CH aux sends to pre-EQ and / or pre-ON. Stereo CH Cue to post EQ. Stereo CH auxes to pre-EQ. Direct out to pre-fade. EXT in -10dBV/+4dBu. Monitor Mute to -20dB attenuator. Remote local monitor mute

2 high powered headphone outputs with level. Booth output on TRS with level. Monitor section has 8-way switch bank to select monitor source. 12 segment 3 colour bar metering. Channel cue overrides the monitor selected in the phones [and booth if Cue Enable is pressed]. Split Cue sends cue signals to left and selected program to right. Mute kills local monitor output [option for -20dB action]. Mono sum button for phase and compatibility check

Technical Specs:

OdBu = 0.775 Volts rms +4dBu = 1.23V rms
OdBu = 1 Volt rms -10dBV = 316mV rms

Maximum output level:
XLR +26dBu into >2k ohm load
TRS jack +21dBu into >2k ohm load
RCA phono +15dBu into >10k ohm load

Internal headroom:
Channels +21dB
Mix to output +23dB

Peak indicators:
Turn on 9 dB before clipping

Meters:
MIX 1.2/MONITOR Peak reading 12 led 3 colour

Frequency response:
20Hz to 40kHz +0/-1dB

Distortion THD+noise measured at +14dBu 1kHz
< 0.006%

Crosstalk Channel shutoff measured at 1kHz
< 90dB

Noise measured rms 22Hz to 22kHz
MIC EIN -128dB referred to 150 ohm source

Residual output noise:
XLR -90dBu (-94dB S/N)
TRS jack -84dBu (-84dB S/N)
L RCA phono -92dBu (-84dB S/N)

Mix noise, ch routed:
XLR -86dBu (-90dB S/N)
TRS jack -83dBu (-83dB S/N)
RCA phono -91dBu (-83dB S/N)

Power Supply Internal switch mode power unit with auto sensing mains input.
MAINS IN socket IEC 3 pin
Power lead Country dependent with moulded mains plug supplied
AC mains 100 to 240V AC @ 50/60Hz
Consumption 30W max M
Gains fuse rating 100-240V AC T500mA 20mm

All of our Allen & Heath products are listed at MAP (the lowest price that the merchandise can legally be sold for). Allen & Heath does NOT honor any warranties from customers who purchased their equipment from a dealer with prices below MAP.

Contact us for Price!

Regular Price: $2,599.99
Our Price: $1,599.00 (FREE shipping within the 48 states)


 Usually ships in one business day.


 

Merchandise is brand new, factory sealed (NOT refurbished, used, or B stock products). All DJ equipment comes with factory warranties, manuals, FREE technical support from KpoDJ.com, and a FREE advertisement for yourself or your DJ company on our site for one full year.

 

E-Mail: info@kpodj.com with any questions.


 

© 2004 - KpoDJ