American DJ Flat Par Tri 7x (ADJ Flat Par Tri7x)

Product: Flat Par Tri 7X
The ADJ Flat Par TRI7X is a professional “low profile” LED Par Can with extremely bright output. It features seven 3-Watt TRI LEDs (3-in-1 RGB) and will not cast any RGB shadows. The units “low profile,” sideways power & DMX Ins/Outs and dual hanging brackets make it ideal for mobile entertainers, permanent installations and for inserting into truss for uplighting.

The Flat Par TRI7X has 7 different DMX channel modes, and may also run in Sound Active or Master/Slave modes. Users can also go “wireless” with the ADJ LED RC wireless remote (sold separately). This LED Par Can also features: 32 Color Macros, Electronic Dimming (0-100%), IEC AC IN and OUT on rear to daisy chain power and a 40-degree beam angle. The Flat Par TRI7’s LEDs are rated at 50,000 hours, and only draws 25-Watts of power per fixture.

Specifications:
• Ultra bright slim Par Can with 7x 3-Watt TRI LEDs (3-in-1 RGB)
• New Feature – Power & DMX Ins/Outs sit sideways so the unit can be set flat on the ground or set inside truss
• Great for performance stages where traditional par cans emit a lot of heat onto performers
• Low profile case design
• Wireless infrared remote control up to 15 ft./4.5M (Model: ADJ LED RC - sold separately)
• 7 DMX Channel modes: 1, 2, 3, 4, 5, 6 or 7 channel modes
• 6 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode; Auto (Program Run) Mode; Sound Active Mode and DMX-512 Mode
• Smooth RGB color mixing (fast or slow color change operation)
• TRI LED (3-in-1) projects no RGB shadows
• 32 built-in Color Macros
• Color strobe effect
• Electronic Dimming: 0 - 100%
• Beam angle: 40-degree
• Linkable via 3-pin XLR cable (In/Out)
• 4-button LED DMX display on rear panel
• Dual bracket system allows fixture to be hung or set on the ground
• IEC AC IN/OUT outlets on rear to daisy chain power
• Safety hook on rear panel
• Includes gel frame for optional diffusion filters
• Run all night – No duty cycle
• Long Life LEDs (50,000 hrs.)
• Power Draw: 26.5W max
• Multi-voltage operation: AC 100V-240V 50/60Hz
• ETL listed
• Dimensions (LxWxH): 10.75”x9”x4.25”/272x230x115mm
• Weight: 6 lbs./2.4 kg.
  Specifications subject to change without notice
  
  ADJ LED RC Infrared Remote Control Features (sold separately):
• Black Out: Turns fixture On/Off
• Auto Run: Automatically run through built-in programs
• Program Selection: Access units built-in programs
• Flash: Strobe effect
• Speed: Control speed of Auto Run
• DMX Mode Select
• Sound Active: Activates sound active mode
• Slave: Designates the fixture as a “slave” fixture in the Master/Slave configuration
• Set Address: Set DMX Address on a fixture
• RGB Buttons: Adjust RGB colors with the “+” and “-“ buttons
• + and – Buttons: Adjust flash rate, speed of the Auto Run and Program Selection