Credit card size remote control
2.4GHz RF wireless signal – Line of sight is NOT needed
100ft range (or 3,000ft range if paired with W-Ape)
Control up to 4 separate groups of fixtures on same remote
Mix/Match any Ape Labs fixtures, Any quantity
Power/Standby Mode (long press to sync standby fixtures with running fixtures)
Static Color Selection/Program Selection (long press to jump to beginning or end)
Group – Control up to 4 Separate Groups of Lights (long press to control all groups at same time)
Speed – Control speed of auto program or strobe speed
The ApeRemote is one of the most powerful remote controls in the market. Control any amount of any Ape Labs fixtures at the same time from a single remote. And divide them up any way you’d like to create up to four separate groups with separate controls. These features give you the ability to create DMX-like lighting shows with nearly no preparation.
The long press features are extremely useful….especially the long press on the “Group” button to toggle on/off a master function where you can control all groups at the same time. Imagine you’re set up for a big wedding. You have ApeLight Maxis uplights near the corners, columns, windows, and key spots on the walls, set to light blue on “Group 1”. You have LightCans and ApeLight Arts creating “Wall Art” on the open sections of the walls around the room, set to a slow fade from amber to light blue on “Group 2”. You have ApeLight Minis under each centerpiece on the tables and more inside your truss totems, set to match the traditional uplighting on “Group 1”. You have ApeStick 4’s behind the bar highlighting the bottles with a pulsing warm white on “Group 3”. And a couple more ApeLight Maxi’s spotlighting the cake, entrance, and patch to the dance floor, set to static white on “Group 4”. Now imagine you’re short staffed and need to MC the intros while also controlling the lights.
Easy. Just do a long press on the group button and hit the sound active button as the intro music kicks on!
Want to take it a step further and sync up the programs too? Just long press “Right” to set them to the same auto program!
From there, you can either continue controlling all fixtures at the same time, or toggle off the master group function to go back to individual control.
Lighting has never been this easy!