FREE! Log in for VIP Deals -Better Than Coupons
AUTHORIZED DEALER for almost all DJ & Lighting Lines

Audio-Technica 2000 Series Wireless System ATW-2192XBI

$629.00 new
Warranty
Reviews: 0 Description Financing Q&A: 0
or $57/mo $0 Shipping, $0 Tax

 

Backordered - Call for ETA Low Price Guarantee

 

or $ 57/mo $0 Shipping, $0 Tax
 
 
Product Description
ATW-R2100b receiver and ATW-T210a body-pack transmitter with BP892xcW MicroSet® omnidirectional condenser headworn microphone. Includes element covers, windscreens, clothing clip, and dual-ear adapter kit.

Audio-Technica’s 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses and places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price. Features switchable antenna power. Also, the optional ATW-CHG2 two-bay recharging station provides power to recharge NiMH batteries in two ATW-T220a handheld transmitters and/or ATW-T210a body-pack transmitters in any combination.

Offering 10 selectable channels and True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Series’ 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica’s Tone Lock™ squelch plus an easy-to-read LCD information display.

Features:
Serious advances in affordable professional wireless

Clear sound quality and rock-solid, dependable performance

Automatic frequency scanning

10 compatible user-switchable channels

Antenna power available for powered antennas & other in-line RF devices

True Diversity operation selects the better signal from the two receiver sections, reducing dropouts

Tone Lock™ tone squelch system fights interference

Rugged metal half-rack receiver with soft-touch controls and LCD display

Balanced XLR and unbalanced 1/4” output jacks enable use with a wide variety of audio gear

Switchable transmitter power output with high and low settings offered

Includes rack-mount kit and detachable UHF antennas

Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver

ATW-T220a Handheld Microphone/Transmitter features PRO 41 Capsule for maximum feedback rejection and consistent sound

ATW-CHG2 charger available for ATW-T220a & ATW-T210a transmitters


Specifications:
OVERALL SYSTEM SPECIFICATIONS:
Operating Frequencies:UHF
Band D: 656.125 to 678.500 MHz DISCONTINUED IN NORTH AMERICA
Band I : 487.125 to 506.500 MHz
Number of Channels:10 total
Modulation Mode:FM
Maximum Deviation:±40 kHz
Dynamic Range:> 110 dB (A-weighted), typical
Total Harmonic Distortion:< 1% (at 1 kHz, ±20 kHz deviation)
Operating Range:100 m (300'), typical Open range environment with no interfering signals.
Operating Temperature Range:5º C to 45º C 41º F to 113º F
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response:100 Hz to 15 kHz (+1 dB, -3 dB)

RECEIVER SPECIFICATIONS:
Receiving System:True diversity
Image Rejection:60 dB nominal, 55 dB minimum
RF Sensitivity:20 dBuV at 60 dB S/N ratio(50 ohms termination)
Antenna Input:BNC-type, 50 ohms
Bias voltage:12V DC, 60 mA, each
Power Requirements:12-18V DC, 500 mA
Dimensions:210.0 mm (8.27") W x 162.2 mm (6.39") D x 44.0 mm (1.73") H
Not including BNC connectors or feet.
Net Weight:1.0 kg (35.3 oz), without accessories
Accessories Included:Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters

ADDITIONAL RECEIVER SPECS:
Maximum Output Level:XLR, balanced: +9 dBV ¼" (6.3 mm), unbalanced: +4 dBV
Balanced Audio Output Attenuator:Two position switch: 0 / -12 dB

BODY-PACK TRANSMITTER SPECIFICATIONS:
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions:Following federal and national regulations
Input Connections:Four-pin Locking Connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +9V
Batteries:Two 1.5V AA alkaline (not included)or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries (with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Other world areas: 3.2 V DC, 320 mA x2
Battery Life:High: 7 hours (alkaline) Low: 9 hours (alkaline)
Depending on battery type and use pattern.
Dimensions:66.0 mm (2.60") W x 22.5 mm (0.89") D x 92.3 mm (3.63") H
Net Weight:81 g (2.9 oz), without batteries

HANDHELD TRANSMITTER SPECIFICATIONS:
RF Power Output High:30 mW; Low: 10 mW (switchable), at 50 ohms
Spurious Emissions:Following federal and national regulations
Microphone Element:Dynamic cardioid
Batteries:Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries (with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Other world areas: 3.2 V DC, 320 mA x2
Battery Life:High: 7 hours (alkaline) Low: 9 hours (alkaline)
Depending on battery type and use pattern.
Dimensions:232.0 mm (9.13") long, 48.0 mm (1.89") diameter
Net Weight:252 g (8.9 oz), without batteries
Accessory Included:AT8456a Quiet-Flex™ stand clamp

Audio Technica ATW-2192XBI   ( Audio-Technica ATW2192XBI )

Show full description
 

 

Financing Options (5) view
 

 

Questions read or post a question

 

User Reviews

Read all reviews
 

 

Other similar products