Log in for VIP Deals -Better Than Coupons!
AUTHORIZED DEALER for almost all DJ & Lighting Lines

Audio-Technica ATW-1322 System 10 PRO Dual Handheld System

 

         This item is in stock!

 


 

$799.00 new
CALL or VIP REGISTRATION (free) new
Warranty

 

 

or $73/mo Free Shipping, No Tax (except NJ)
 
 
User Reviews (1)

Please log-in to write your review

Average rating: 5, based on 1 reviews
read all reviews
Product Description

Audio Technica ATW-1322  (Audio-Technica atw13122)

Includes:

System 10 PRO ATW-RC13 Rack-Mount Digital Wireless Receiver (2.4 GHz)
2 x ATW-RU13 System 10 PRO Receiver Unit (2.4 GHz)
2 x ATW-T1002 System 10 Handheld Unidirectional Microphone/Transmitter


The ATW-1322 System 10 PRO is a digital 24-bit/48 kHz wireless microphone system that operates on the 2.4 GHz ISM band and is used to capture audio for applications such as live stage, theater, DJ setups, and more.

The System 10 PRO features a half-rack chassis that allows you to mount one or two receiver units, however the receiver units can be released from the chassis and mounted remotely (up to 328' away) via Ethernet cable. Up to five chassis or 10 receiver units can be linked using a RJ12 cable, creating a multi-channel system with up to 10 channels.

In addition, other features include an easy-to-read display on each transmitter and receiver unit for quick setup, clear and natural-quality sound, and three levels of diversity, namely frequency, time, and space. Frequency Diversity sends the signal on two allocated frequencies, Time Diversity sends the signal in multiple time slots, and Space Diversity uses two antennas on each transmitter and receiver unit, thus to help maximize signal integrity.

The System 10 PRO Rack-Mount system includes one ATW-RC13 receiver chassis with rack-mount adapters, two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, one RJ12 cable, one AC adapter, and two ATW-T1002 handheld dynamic handheld microphones.

Features:

Digital 24-bit/48 kHz Operation
2.4 GHz ISM Band
Automatic Frequency Selection
XLR and 1/4" Outputs
Channel Selection, Sync, and Setup
Three Levels of Diversity Assurance
Easy-To-Read Display
Can be Linked to Ten Receiver Units
Receiver Units Can Be Mounted Remotely
Ground-Lift Switch

Specifications:

Operating Frequencies: 2.4 GHz ISM band
Dynamic Range: >109 dB (A-weighted), typical
Total Harmonic Distortion: <0.05% typical
Operating Range: 60 m (200') Open range env. with no interfering signals
Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
Frequency Response: 20 Hz to 20 kHz Depending on microphone type

RECEIVER SPECIFICATIONS
Receiving System: Diversity (frequency/time/space)
Output Connectors: Remote Receiver Connector: RJ45; Link Connector: RJ12
Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Dimensions: 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D
Net Weight: 940 grams (33.2 oz)
Accessory Included: Power supply
Accessories Included: AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet

BODY-PACK TRANSMITTER SPECIFICATIONS
RF Power Output: 10 mW
Spurious Emissions: Following federal and national regulations
Input Connections: Four-pin Locking Connector; Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Batteries: Two 1.5V AA not included
Battery Life: >7 hours (alkaline) Depending on battery type and use pattern
Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Net Weight: 100 grams (3.5 oz) without batteries

HANDHELD TRANSMITTER SPECIFICATIONS
RF Power Output: 10 mW
Spurious Emissions: Following federal and national regulations
Batteries: Two 1.5V AA not included
Battery Life: >7 hours (alkaline) Depending on battery type and use pattern
Dimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
Net Weight: 280 grams (9.9 oz) without batteries
Accessory Included: AT8456a Quiet-Flex stand clamp

 

In accordance with California's Prop 65 Compliance Law, Regulation Requires us to Inform California Customers of the Following Warnings for All Products:

*Warning:* This product can expose you to chemicals including wood dust, which is known in the state of California to cause cancer or birth defects or other reproductive harm. For more information, please go to www.P65Warnings.ca.gov

*Warning:* This product can expose you to chemicals including Di-isodecyl phthalate, which is known in the state of California to cause cancer or birth defects or other reproductive harm. For more information, please go to www.P65Warnings.ca.gov

show full description
 

 

Financing Options (4) view
 

 

Questions read or post a question