Recommended for professional recording and critical applications in broadcast, this versatile microphone may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant â free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
The AT4049b consists of two modular subassemblies: an AT4900b-48 body and an AT4049b-EL omnidirectional head capsule (both available separately). Additional interchangeable capsules are available in cardioid (AT4051b-EL) and hypercardioid (AT4053b-EL).
Features:
Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
Omnidirectional polar pattern provides maximum ambient pickup
Direct-coupled, balanced output results in a clean signal even under high-output conditions
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Switchable 80 Hz hi-pass filter and 10 dB pad
Rugged turned-brass microphone housing for enduring dependability
State-of-the-art design and manufacturing techniques ensure compliance with A-Tâs stringent consistency and reliability standards
RoHS-compliant â free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
Specifications:
ELEMENT:Externally polarized (DC bias) capacitor
POLAR PATTERN:Omnidirectional
FREQUENCY RESPONSE:20-20,000 Hz
LOW FREQUENCY ROLL-OFF:80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY:-34 dB (19.9 mV) re 1V at 1 Pa
IMPEDANCE:50 ohms
MAXIMUM INPUT SOUND LEVEL:145 dB SPL, 1 kHz at 1% T.H.D.;155 dB SPL, with 10 dB pad (nominal)
NOISE:16 dB SPL
DYNAMIC RANGE:(typical) 129 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO:78 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS:48V DC, 4.8 mA typical
SWITCH:Flat, roll-off; 10 dB pad (nominal)
WEIGHT:130 g (4.6 oz)
DIMENSIONS:155.0 mm (6.10") long,21.0 mm (0.83") maximum body diameter
OUTPUT CONNECTOR:Integral 3-pin XLRM-type
OPTIONAL INTERCHANGEABLE ELEMENTS:AT4051b-EL (cardioid);AT4053b-EL (hypercardioid)
ACCESSORIES FURNISHED:AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
AUDIO-TECHNICA CASE STYLE:S1
| Order Value | Term Length | APR |
|---|---|---|
| $50-699.99 | 3, 6 or 12 Months | Interest-Bearing |
| $700+ | 3, 6 Months | 0% (Qualified Customers) |
| 3, 6, 12 or 18 Months | Interest-Bearing |
