Behringer C2 (pair)

Behringer C-2 (Behringer C2 Condenser)

Behringer C2 Condenser Microphone

Perfect for stereo recording. Ultra-wide frequency response. Cardioid pattern.

These professional condenser microphones for studio recording and live applications have all the big-time features packed in an extremely compact form factor. They are sold as a matched pair -- perfect for stereophonic recording -- for a price you wouldn't even consider it bought you a single one. The C-2s utilize a low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction and their inconspicuous size makes them perfect for acoustic instruments, overhead applications, pianos and similar. The cardioid pickup pattern effectively eliminates feedback, plus there is switchable low frequency roll-off and -10 dB input attenuation. Ultra low-noise transformerless FET input eliminates low-frequency distortion, while a gold-plated 3-pin XLR connector assures the highest signal integrity. Custom microphone stand adapters, windscreens, stereo-bar and transport case are all included, making these condenser microphones ready for action straight out of the box! If super-compact size is paramount but you don't want to compromise on the performance, then a pair of C-2s is the answer.

Features:
2 professional true condenser microphones for studio recording and live applications

Sold as matched pair - perfect for stereophonic recording

Low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction

Perfect for acoustic instruments, overhead, piano, etc.

Cardioid pickup pattern for effective feedback elimination

Switchable low-frequency roll-off and -10 dB input attenuation

Custom microphone stand adapters, windscreens, stereo-bar and transport case included

Ultra low-noise transformerless FET input eliminates low-frequency distortion

Gold-plated 3-pin XLR connector for highest signal integrity

High-quality components and exceptionally rugged construction ensure long life

Conceived and designed by Behringer Germany
Technical Info

Transducer Type: True condenser, 16mm (0.63 in.) single diaphragm

Operating Principle: Pressure gradient

Polar Pattern: Cardioid

Connection: Gold-plated balanced XLR connector

Open Circuit Sensitivity (at 1kHz): -41dBV (0dBV = 1V/Pa)

Frequency Response: 20Hz - 20kHz

Level Attenuation: -10dB (switchable)

Low-Cut Filter: 6dB/oct. At 120Hz (switchable)

Max. SPL (1%THD @ 1kHz): 140dB (0dB); 150dB (-10dB)

Equivalent SPL (IEC 651): 19dB-A

Signal-to-Noise Ratio: 75dB

Nominal Impedance: 75 ohms

Load Impedance: >1k ohms

Supply Voltage: +48V

Supply Current: 3mA

Dimensions:
Shaft: Approx. 13/16 in. (20mm)
Length: Approx. 3-11/16 in. (94mm)

Weight: Approx. 0.21 lbs. (900g)