The NU12000 is so much more efficient than conventional designs, it runs cooler and doesnt require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. The NU12000 amp to run in your choice of dual mono, stereo or mono bridge modes. The iNUKE NU12000 power amplifier is a serious amp for your most demanding applications. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world.
Delivers 2 x 6000 Watts into 2 Ohms, 2 x 3400 Watts into 4 Ohms, 2 x 1700 Watts into 8 Ohms and weighs less than 26.5 lbs / 12 kg.
Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup.
Ultra-efficient switch-mode power supply.
"Zero-Attack" limiters offer maximum output level with reliable overload protection.
Built-in stereo crossover with low-cut, high-cut and full range mode.
Detented and illuminated gain controls.
Precise 4-segment Signal and Limit LEDs to monitor performance.
XLR and 1/4'' TRS combination input connectors.
Professional twist-lock speaker connectors.
Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show.
Back-to-front ventilation system prevents thermal buildup.
Delivered with Neutrik powerCON 32A twist-lock connector (cable not included).
3-Year Warranty Program.
Conceived and designed by BEHRINGER Germany.
Power Output 2 Ω per channel, stereo: 2 x 6000 W
4 Ω per channel, stereo: 2 x 3400 W
8 Ω per channel, stereo: 2 x 1700 W
Front Power switch gain controls (channels A and B)
Rear Mode switch (stereo/mono)
Crossover switch (LF/full-range/HF)
Power Amber backlit illuminated gain controls
Limiter Per channel: 0 dB, full scale
Signal Per channel: -24, -12, -6 dB
RMS Voltage Swing 8 Ω: 0.75 V (-0.3 dBu)
Input Connectors 2 x combo jacks
Input Impedance 10 kΩ unbalanced
20 kΩ balanced
Outputs 2 x locking-style professional speaker connectors
Circuit Type Class-D
Distortion <0.2 %
Frequency Response 20 to 20,000 Hz, +0/-2 dB
Damping Factor >100 at 8Ω
Signal-to-noise >100 dB
Circuit Protection Cooling: continuously variable speed fan, back-to-front air flow
Amplifier protection: thermal and DC protection, stable into reactive or mismatched loads
Load protection: on/off muting, DC-fault power supply shutdown
Power Supply USA/Canada/Japan: 100 to 120 V at 50/60 Hz (50 A 120 VAC)
UK/Australia/Europe/Korea/China: 220 to 240 V at 50/60 Hz (25 A at 250 VAC)
Power Consumption 2 Ω at 1/8 rated power: 1300 W
4 Ω at 1/8 rated power: 760 W
Connector Mains: Neutrik powerCON 32 A
Dimensions (HxWxD) 3.7 x 19 x 17.2" (94 x 482 x 436 mm)
Weight Approximately 26.5 lb (12.0 kg)