The launch of the new VERTUS columns follows a steep rise in the use of the VERTUS CLA406A for mobile sound reinforcement applications – a trend spurred on by the column’s depth of versatility and performance. Now making life easier for those on the road, both the CLA406.2A and more compact CLA206A have been designed with portability in mind, from the rugged hardware to new accessories which make set-up both extremely quick and highly intuitive.
Included within the extended accessories range is a flybar for easy system suspension (users simply add a clamp for tubular coupling), plus a foldable floor stand offering a choice of angles from 0°-10°, and a bracket for coupling two enclosures at angles of 0°- 20° (in steps of 5°). The accessories connect to the cabinets using supplied M10 screws for fixed installation, or via quick release pins (optional) for mobile use.
In terms of hardware, the enclosures now offer four lateral inserts which can accept both the quick release pins and M10 screws, while M6 rear suspension points have been added for additional installation flexibility.
2 way bi-amplified line array column
0,47" birch plywood with scratch resistant varnish
2 x 6,5" custom woofer with 1,5" voice coil
Neodymium B&C compression HF driver with 1,4" throat and 2,5" voice coil
Class D 600W RMS amplifier for LF and 300W RMS for HF
DSPprocessor with 8 equalization presets
100°H x 25°V dispersion
Completely Manufactured in Italy
Built-in amplifier max. LF/HF 600/300W RMS
Built-in amplifier max. peak LF/HF 1200 / 600W
Frequency response 65Hz - 20KHz
Low frequency woofer 2x 6.5- 1.5 coil
High frequency driver 1x 1.4 - 2.5 coil - neodymium
Maximum SPL 133db
Dispersion H x V 100° x 25°
Input impedance 22
Crossover frequency 1,2
AC Power requirements 640
Input connectors XLR with XLR with loop
Power cord 5m
Dimensions (WxHxD) 190x777x290mm