Martin Jem Hazer Pro
- DISCONTINUED

product discontinued

This product has been discontinued by the manufacturer. Please contact us to find a replacement.

*Discontinued

The JEM Hazer Pro is a top of the range water-based haze machine designed for the highly demanding professional market. Its ability to produce exceptionally fine atmospheric haze in a short period of time while operating at low noise levels makes it an ideal choice for rental houses, medium to large shows, theatres, studios, clubs, bars, cruise ships, theme parks and more.

Robust yet small and lightweight, the JEM Hazer Pro is capable of dispersing an even, continuous haze with superior optical clarity and reflectivity, the perfect small-particle haze for highlighting today’s highly defined light beams. The highly efficent JEM C-Plus Haze fluid was developed for the JEM Hazer Pro and a full reservoir can yield up to 65-hours of run time before refilling is neccessary.  

The JEM Hazer Pro features a battery-powered automatic shutdown system that purges the trackless heat exchanger system, thus preventing clogging, reducing maintenance and extending product life. Robust control options allow the machine to be controlled independently, remotely or with DMX featuring RDM compatability.

Finest haze production in its class
Programmable fast access control keys
Actors' Equity/Broadway League Approved.

Features:

Continuous effect output
Water-based fluid provides dense particles and even haze
Sealed fluid system with quick-connect fittings
2.5 l fluid reservoir -  10.5hours on full output
User-friendly on-board digital control panel
Pre-programmed 'silent' mode
Independent  variable haze and fan control
DMX Control with RDM
Road-worthy industrial design
Lightweight and small footprint
Optional Flying Kit and Digital Remote Control
Battery powered automatic shutdown system - prevents clogging

Specifications:

Physical
Length: 565 mm (22.3 in.)
Width: 271 mm (10.7 in.)
Height: 298 mm (11.8 in.)
Height with rigging kit: 294 mm (11.6 in.)
Dry weight: 15 kg (33.1 lbs.)
Filled weight: 17.5 kg (38.6 lbs.)

Performance
Coverage volume: 5500 m3 (194,231 ft3) per minute
Operating time with 2.5 l fluid (minimum/maximum): 10.5/65 hours
Operating time: Continuous
Ready time: 6-minutes
Ambient noise: Silent mode

Control and Programming
Control options: Digital control panel, programmable fast access keys, DMX, optional digital remote control, master/slave link mode
Control parameters: Continuous or timer-controlled output
Haze and fan: Independent variable output, 0-100%
DMX channels: 3 (Haze, Fan, Control)
Self cleaning cycle: Battery powered automatic shutdown, manually engaged, or DMX trigger
DMX compliance: ANSI E1.11 - USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20 RDM

Construction
Housing: Steel and aluminum
Color: Black
Heat exchanger: 600 W trackless heat exchanger, thermally protected
Blower fan: Integrated, 200-2500 RPM
Fluid pump: Oscillating piston, high pressure
Fluid management: Fluid out sensing, sealed for transportation
Fluid reservoir: 2.5 l drop-in reservoir with quick-connect fitting

Installation
Mounting: Standing or optional flying kit
Orientation: Up to +/- 30° from horizontal
Clearance around machine: 100 mm (4.0 in.)

Connections
AC power: Neutrik powerCon
DMX, link mode in/out: 3- and 5-pin locking XLR
Remote control: 3-pin locking XLR
Firmware: AVR socket

Electrical
US Model
AC power: 100-130 V, 50/60 Hz
Main fuse: 10 AT (slow blow), 125 V
Typical power and current: 675 W, 6 A*
*Measurements made at nominal voltage. Allow for a deviation of +/- 10%

Thermal
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min): 5° C (41° F)
Exterior surface temperature, steady state: 30° C (86° F)
Maximum nozzle temperature: 290° C (554° F)

Approvals
EU EMC: EN 61000-6-3
EU safety: EN 60 335-1+A15, EN 62233
EU Immunity: EN 61000-6-1
US safety (pending): UL 998
Canadian Safety (pending): CSA C22.2 No. 104-01
Australia/NZ (pending): RCM
Calibration factors have been developed and approved by the Actors’ Equity Association and the Broadway League for use in measuring theatrical haze with the JEM Hazer Pro and JEM C-Plus Haze Fluid:

Martin DJ Jem Haze Pro (Martin Jem Hazer-Pro)

Option #1 - Affirm Financing

Order Value Term Length APR
$50-699.99 3, 6 or 12 Months Interest-Bearing
$700+ 3, 6 Months 0% (Qualified Customers)
3, 6, 12 or 18 Months Interest-Bearing
  • -Upon Checkout, click Affirm
  • -Get approved in seconds
  • -No late fees

Option #2 - Lease Financing

Option #3 - Business Lease Financing

Option #4 - Free Lay-Away Program

  • -Call 877-775-7635 to get started
  • -No credit checks, no late fees, no minimum order
  • -Pay when you can & we'll ship when it's paid off
  • -FREE to use ($10 initial charge is applied to final payment)
LIGHTS & VISUAL > Video, FX Machines & Furniture > Fog / Haze Machines
UPC: 5706681220083
Brand: Martin

Other similar products