Rane RAD26
Single Room Remote Audio Device Interface - DISCONTINUED

product discontinued

This product has been discontinued by the manufacturer. Please contact us to find a replacement.

*Discontinued

The RANE Electronics RAD26 is a HAL compatible remote audio device that offers audio and logic I/O with a 2-channel 4W amplifier well suited for presentation sources, volume, projector and screen control, and meeting rooms with A/V teleconferencing and speakers as well as spas with background music, local music input, stereo ceiling speakers, and hotel or cruise ship room TV and local input sound systems.

The RAD26 features a color LCD display and rotary encoders to control a variety of sources and destinations. The dual universal audio I/O interface includes line-level input jacks for local needs, a headphone output, and a dual 4-watt amplifier. A single shielded cat 5e (or better) cable drop is all that's needed to connect it to a HAL compatible multiprocessor.

On the rear, there are 2 balanced Euroblock mic/line/line+ audio inputs with the mode set in Halogen software. The line+ inputs accept unbalanced left and right signals and sums them to mono. Additionally, 24V phantom power is available for condenser mics. For end users, there is a 3.5mm Aux input on the underside of the front, accepting the output of a smartphone, laptop, or other consumer device.

Three logic closure inputs and three active-low outputs add to the control capabilities. The built-in amplifier powers a small stereo pair of room speakers, or it can be switched in software to power a single 8W speaker. The RAD26 fits with most decor in a matte white metal box. A programmable ambient light sensor automatically dims the display and status LEDs in darkened rooms. The Rane RAD26 includes a mounting bracket with an installation tool.

Features:
Remote Audio Device (RAD) with audio and logic I/O and on-board 2-channel 4W amplifier
Local audio line input (smartphone, laptop, MP3)
Two balanced Euroblock inputs Mic / Line / Line+
Amplifier outputs for speakers
Level control
Source selection

Specifications:
Indicators Signal Indicators: -50 Typical dBFS Unbalanced / Balanced Output, Green LED, Peak Reading
Overload Indicators: -0.5 Typical dBFS Unbalanced / Balanced Output, Red LED, Peak Reading
Microphone Input Microphone Input Specs (Level Set in Software) (0.1" / 2.5 mm Euroblock Terminal)

Input Impedance: 2.16 Kilohms (Typical), Balanced, 1.08 Kilohms + 1.08 Kilohms
Gain Range (Dynamic Mic Mode): 30 to 50 dB (Typical) in 1 dB Steps
Gain Range (Condenser Mic Mode) 18 to 38 dB (Typical) in 1 dB Steps
Maximum Input (Dynamic Mic Mode): -16 dBu (Typical) -18 dBV, Balanced, Gain = 30 dB
Maximum Input (Condenser Mic Mode): -4 dBu (Typical) -6 dBV, Balanced, Gain = 18 dB
Equivalent Input Noise: -126 dBu (Typical) 20 kHz BW, Rs = 150 Ohms, Gain = 30 dB
CMRR: -70 dB (Maximum) Rs = 150 Ohms, 1 kHz, Gain = 30 dB
Frequency Response: 20 Hz to 20 kHz (Typical) +0/-0.5 dB, at All Gain Settings
THD + Noise: 0.008% (Typical) at 1 kHz, 20 kHz BW, Rs = 150 Ohms, Output = -6 dBFS, Gain = 30 dB
Phantom Power: 24V 2% 10 mA Max, Always On in Condenser Mic Mode
Line Inputs (Balanced) Balanced Line-Level Input Specs (0.1" / 2.5 mm Euroblock Terminal)

Input Impedance: 10 Kilohms, 1% Balanced
Gain Range: 0 to 20 dB (Typical) in 1 dB Steps
Maximum Input Level: 14 Ohms at 1 kHz (Typical)
Frequency Response: 20 Hz to 20 kHz dB (Typical) +0, -0.5 dB
Dynamic Range (Input): 103 dB (Typical) Re: 0 dBFS, 20 kHz BW, A-Weighted
THD + Noise: 0.008% (Typical) at 1 kHz, 20 kHz BW, Rs = 150 Ohms, Output = -6 dBFS, Gain = 0 dB
Line+ Mode: (Active Summer) Left ("+") and Right ("-") Signals Summed to Mono
Maximum Input Level L+R: 14 dBu (Maximum 12 dBV)
AUX Inputs Auxiliary Input (1/8" / 3.5 mm Stereo TRS Switching Connector)

Gain: 0 to 20 dB (Typical) in 1 dB Steps
Max Input Level: 12 dBu (Max) 10 dBV
Dynamic Range (Input): 101 dB (Typical) re: 0 dBFS, 20 kHz BW, A-Weighted
Frequency Response: 20 Hz to 20 kHz, Typically +0/-0.5 dB, at All Gain Settings
THD + Noise: 0.008% (Typical) at 1 kHz, 20 kHz BW, Rs = 150 Ohms, Output = -6 dBFS, Gain = 0 dB
Balanced Line Output Output Impedance: 200 Ohms, 1% Each Leg
Maximum Output Level: 14 dBu (Minimum) < 1% THD, Load = 10 Kilohms
Dynamic Range: 104 dB (Typical) (Re: 0 dBFS, 20 kHz BW, A-Weighted)
Frequency Response: 20 Hz to 20 kHz (Typical), +0/-0.5 dB, at All Gain Settings
THD + Noise: 0.01% at 1 kHz, 20 kHz BW, Rs = 150 Ohms, Output = +4 dBu, RAD26 Input to Output
Headphone Output Headphone Output: (1/8" / 3.5 mm Stereo TRS Switching Connector)
Maximum Output: 130 mW per Channel, Rload = 32 Ohms
Minimum Load: 32 Ohms
Amplifier Output Amplifier Outputs (Full-Bridge Class-D Power Amplifier)
Maximum Output Power (Dual Mode): 4 W Maximum, 8-Ohm Load, < 0.1% THD, Both Channels
Maximum Output Power (Single Mode): 8 W Maximum 8-Ohm Load, < 0.1% THD, Ch.1 Only, Ch. 2 Disabled
Dynamic Range: 99 dB (Typical) re: 0 dBFS, 20 kHz BW, A-Weighted, Dual 4 W Mode
Frequency Response: 20 Hz to 20 kHz +0/-0.5 dB, at All Gain Settings
THD + Noise: .02% (Typical) at 1 kHz, 20 kHz BW, Rload = 8 Ohms, Output = 1 W
Logic Connections Logic Inputs: 3, Contact Closure to Ground (0.1" / 2.5 mm Euroblock Terminal)
Internal Pull-Up: 51.1 Kilohms 1% 5.0 V
Logic High-Input Level: > 2.0 V (Minimum) Normal State
Logic Low-Input Level: < 0.9 V (Maximum) External Circuit Must Sink > 80 uA to Assert

Logic Outputs: 2 Relay Drive, LED or Logic Level Output (0.1" / 2.5 mm Euroblock Terminal)
Internal Pull-Up: 1.0 Kilohms, 1% 5.0 V, Protected to 30 V, Reverse Polarity Protected
Sink Current: 200 mA (Maximum) Output FET On
LED Drive Current: 2 mA Output FET Off, Driving an LED with Vf = 2.0 V
Logic High-Input Level: 4.7 (Minimum) V Output FET Off, Output Current = 0 mA
Logic Low-Input Level: 0.1 (Maximum) Output FET On, Sink Current < 200 mA
Color Display Size: 2.0 x 1.5" / 49.8 x 37.6 mm
Resolution: 320 x 240 Pixels
Color Depth: 16-Bit 131,071 Colors
Backlight Brightness: 320 cd/m2 (Typical) Adjustable in Software from Maximum to Off in 10 Steps
Ambient Light Sensitivity: Software Configurable to Adjust How Sensitive the RAD26 Screen Is to Changes in Ambient Light
Wiring Class 2
Conformance CE, FCC
Ambient Temperature 104°F / 40°C (Maximum External Loading)
Dimensions Size: 5.9 x 4.5 x 0.9" / 149.1 x 115.1 x 22.1 mm
Depth with Knob: 1.6" / 40 mm
Wall Bracket Size: 4.9 x 3.9" / 123.8 x 98.4 mm
Weight 1.4 lb / 617 g

Option #1 - Affirm Financing

Order Value Term Length APR
$50-699.99 3, 6 or 12 Months Interest-Bearing
$700+ 3, 6 Months 0% (Qualified Customers)
3, 6, 12 or 18 Months Interest-Bearing
  • -Upon Checkout, click Affirm
  • -Get approved in seconds
  • -No late fees

Option #2 - Lease Financing

Option #3 - Business Lease Financing

Option #4 - Free Lay-Away Program

  • -Call 877-775-7635 to get started
  • -No credit checks, no late fees, no minimum order
  • -Pay when you can & we'll ship when it's paid off
  • -FREE to use ($10 initial charge is applied to final payment)
TRUSS & ACCESSORIES > Stands, Scrims & Stages > Other Accessories
Brand: Rane