The P2110 is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected.
The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting. The front logo is in aluminium and rotatable.
The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing.
The system features a selectable line transformer for 70 - 100 Volt applications. P 2110-T is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
Stainless steel bracket
One 10" high-output LF transducer with 2" voice coil
One RCF Precision 1" Compression Driver with 1.5" voice coil
90° x 40° constant directivity horn
Built in passive crossover and selectable line transformer
10° X 20° enclosure sides for array configurations
Active Mosfet Compression Driver Protection
LICC (Low Impedance Compensated Crossover) network
12 brass suspension points (M8)
Frequency Response -10 dB:95 Hz ÷ 20000 Hz
Max SPL @ 1m:124 dB
Horizontal coverage angle:90°
Vertical coverage angle:40°
Directivity index; Q:11
System Sensitivity:95 dB
Nominal Impedance:16 Ω
Power Handling:200 W
Peak Power Handling:800 W
Recommended Amplifier:400 W
Crossover frequencies:2000 Hz
Compression Driver:1" HF driver, 1,5" voice coil
Nominal Impedance:8 Ω
Input Power Rating:25 W AES
Woofer:10" woofer, 2.5" voice coil
Nominal Impedance:16 Ω
Input Power Rating:180 W AES
Input connector:5m, 4-adriges Neopren Kabel
Constant voltage transformer:70/100
Power Selection:70V/30W ,15W , 100V/60W, 30W
Cabinet Material:Polyethylene rotomoulded
Hardware:12 x M8 inserts+ U-brackets and pair of spacers
Grille:Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing