VIP Deals! -Better Than Coupons
AUTHORIZED DEALER for almost all DJ & Lighting Lines

Samson SM10

$249.99 new
Reviews: 0 Description Financing Q&A: 0
or $23/mo $0 Shipping, $0 Tax


Available - Call to confirm exact lead time
Low Price Guarantee


or $ 23/mo $0 Shipping, $0 Tax
Product Description
Ideal for stage, studio and an infinite variety of installation applications, Samson’s SM10 Rackmount Line Mixer is a versatile and reliable addition to your audio setup. This internally powered, 19" rackmount metal chassis unit can be easily integrated into any existing system to more efficiently group your signals.

The Samson SM10 mixer features ten channels with 1/4" stereo line inputs and a balance control for each channel. Two channels include XLR mic inputs. This allows you to blend the relative levels of stereo inputs to your liking. In addition, each channel includes a switch for +4 dBu or -10 dBV line level input.

For output, the Samson SM10 mixer provides electronically balanced main stereo XLR and 1/4" line outputs. The Samson SM10 provides versatile signal routing via Main Mix, Mix B, Monitor and EFX bus outputs, as well as low noise and discrete microphone pre-amplifiers with 48-volt phantom power.

Two auxiliary sends can also be used to route signals to external effects, or create a separate mix for on-stage monitors. The Samson SM10 Rack Mount Mixer features front panel headphone and monitor outputs with dedicated level controls. The mix may be audited with the Samson SM10's 6-segment LED meter and a flexible meter/headphone source control.

The generously featured Samson SM10 Rackmount Line Mixer is right at home on stage, in studios, boardrooms, health clubs, restaurants, houses of worship, and more. Whether your interests lie in audio or video applications, the Samson SM10 Mixer brings various signals together for an amazing audio experience.

Samson SM10 Mixer Features:

Ten channels (eight 1/4" stereo line inputs, two combination XLR-1/4" inputs)
Balance control for each channel
Switchable +4 dBu or -10 dBV line input level
Balanced main stereo XLR and 1/4" line outputs
Versatile signal routing
Low noise, discrete microphone pre-amplifiers with 48-volt phantom power
Two auxiliary sends
Front-panel headphone and monitor outputs with level controls
Flexible 6-segment LED meter/headphone source control
Center detents for all controls for use in low light situations
Single 19" rackmount metal chassis with internal power supply

Samson SM10 Mixer Specifications:

Microphone: XLR balanced (2)

1/4 inch TRS balanced (Ch 1-8)
1/4 inch stereo (Ch 9-10)

Input Impedance:
Microphone: 1.5K ohms
23K ohms (+4 dBu, Ch 1-8)
40K ohms (-10 dBV, Ch 1-8)
20K ohms (Ch 9-10)

Maximum Gain:
Microphone: 65 dB
Line: 39 dB
Line Operating Level: +4 dBu / -10 dBV selectable
Maximum Input Level (1 kHz, +/-3 dB):
Microphone Input: -4 dBu
Line Input: +28 dBu
Equivalent Input Noise: - 123 dBu unweighted

Main Outputs:
1/4 inch TRS balanced (2)
XLR (2)
Output Impedance: 200 ohms Main Out
Gain Range: -? to +15 dB
Max output level: +22 dBu
MON (Pre Fade Out): 1/4 inch impedance balanced mono output (front panel), Stereo MON (rear panel)
EFX (Post Fade Out): 1/4 inch unbalanced
Output Impedance: 100 ohms
Headphone: 1/4 inch TRS Stereo
Output (600 Ohm load): 100 mW

Frequency Response: 10 Hz - 23 kHz +/-1 dB
Signal-to-noise ratio: > 90 dB typical
THD: <0.01% typical

Crosstalk (1 kHz):
-70 dB between input channels
-70 dB between input/output channels
Phantom Power: 48 Volts DC
Power Requirements: 120-240 VAC / 50-60 Hz
Dimensions (LxWxH): 19 x 8.25 x 1.75 inches/ 484 x 210 x 44.5mm
Weight: 6 lbs / 2.8 kg

Samson SAMS10   ( Samson SM 10 Line Mixer )

Show full description


Financing Options (5) view


User Reviews

Read all reviews


Questions read or post a question


Other similar products