FLARIS BLADE is an IP65-rated hybrid linear fixture that offers RGBW pixel mapping combined with powerful white light strobe/blinder functionality in a single, robust form factor. It features a center strobe of 5W cool white LEDs surrounded by 224 x 2W RGBW LEDs that are independently pixel mappable into 16 segments that can be controlled via DMX or Art-Net for endless variety in color, strobe, and pixel mapping effects. The LEDs are tightly knit together at a pixel pitch of just 5mm emitting into the same tube for seamless segments. A slide-in diffusion filter is included that delivers fluid direct-view looks guaranteed to be free of pixelation. The housing offers flexible rigging capabilities along with integrated multi-unit linking hardware.

FEATURES:

Powerful Strobe
Center strobe of 112 x 5W cool white LEDs mappable into 16 segments.

RGBW Pixel Mapping
224 x 2W RGBW outer pixel segments mappable into 16 zones.

Slide In Diffusion Filter
Diffused output for completely seamless, fluid looks with no visible pixelation.

IP65-Rated
Water, dust-proof fan-less housing, multi-unit interconnectivity.

• 112 x 5W 6,500K White LED Strobe w/ 16 mappable segments

• 224 x 2W RGBW outer pixel segments w/ 16 mappable zones.

• 5mm spacing being each pixel

• Slide-In Milky Diffusion Filter

• IP65-Rated Weatherproof, fanless housing (temporary outdoor use)

• Detachable, adjustable standoff feet w/ quarter-turn locks.

• Built-In Eye-Candy Effect Macros

• Mountable from rear or side of fixture via omega clamps

• Interlocking Hardware for multi-unit linking

• ArtNet Control w/ Independent Universes for Strobe & Pixel Control*

• DMX Control + RDM Compatible

• Master/Slave + Stand Alone FX Modes

• PowerCon TRUE1 Connections

• 5-Pin XLR Connection

Physical:
Height: 3.4″ / 88mm

Width: 7.1″ / 181mm

Length: 39.2″ / 1000mm

Net Weight: 19lbs / 8.9kg

Electrical:
Max Power Consumption: 780W

Voltage: 120-240V AC

SPECIFICATIONS:

Optical
Source (Center Strobe): 112 x 5W SMD Cool White
Source (Outer Pixel): 224 x 2W SMD5050 RGBW
LED Pixel Spacing: 5mm
Color Temperature: 6,500-7,250K
Luminous Flux (Strobe): 44,800~ lm (est.)
Luminous Flux (Pixel @ Full, all colors): 24,640~ lm (est.)
Luminous Flux (Combined @ Full): 69,440~ lm (est.)
Source Life Expectancy: 50,000 Hours
Beam Angle: 120° | 145º w/ Diffuser
COLOR & PIXEL
Color Spectrum: RGBW + White
Pixel Zones: 16 (Strobe) + 16 (RGBW)
Pixels Per Zone: 7
Color Mixing: RGBW
Color Wheel: Virtual
Macros: Built-In Programs for Strobe & Pixels with Speed Adjustment
DYNAMIC EFFECTS
Dimming Resolution: 16-bit Dimming
Dimmer Curves: Linear
Stand-Alone Mode: Selection of Static Color & Macro FX
Built-in Automated Programs: Yes
Master/Slave Mode: Yes
Shutter/Strobe: 0.3 – 25Hz
BODY
Body: Die-Cast Aluminum
Body Color: Black
Control
Protocols: DMX512, Art-Net, RDM
DMX channels: 13 / 64 / 89 CH
Artnet Modes: 4 / 20 CH
Stand-Alone, Master/Slave Modes
Display: Multi-Function Display w/ Waterproof Lockout Buttons
Electronics
Dimmer: 16-bit linear 0 ~ 100% electronic dimmer
Strobe / Shutter: 0.3 – 25 Hz, electronic
Operating Temperature: -4 °F ~ 113 °F
Max Power Unit Linking: 4 @ 120V | 8 @ 220V
Electrical
Power Supply: 100-240V – 50/60Hz
Max Power Consumption: 780W
Power factor: >0.96
Physical
Ingress Protection Rating: IP65, outdoor/wet
Cooling: Convective Heatsink
Signal connection: IP-Rated 5-Pin XLR IN/THRU + IP-Rated RJ45 IN/THRU
Power connection: TRUE1 Compatible IP65 Power Connector
Dimensions (WxHxL): 7.1″ x 3.4” x 39.2”
Weight: 19.6lbs / 8.9kg
What’s Included
FLARIS BLADE
Slide-In Milky Diffusion Filter
IP65 Master Power Cable
5-Pin XLR Cable
Adjustable Stand-Off Base w/ Omega Yoke
Interlocking Hardware
Safety Cable
Optional Accessories:
Power Linking Cables
Side Mount Omega Adapter
Trigger Clamp
4-Unit Flight Case

Volux Lighting VLX700FB (Volux IP65-Rated Hybrid RBGW LED Strobe / Pixel Bar)