B-52 Matrix 2000 (B52 Matrix 2000)
1200-watt Active Speaker System - 18" Subwoofer and 2x12" Satellites
The MATRIX-2000 is a complete sound reinforcement solution consisting of two 12” two-way speakers and an 18” subwoofer, equipped with a built-in 1200-watt three-channel amplifier. The three-channel amplifier houses all the electronics required to run the system including electronic crossovers, equalization and compressors. The electronic circuity is fine tuned to match all of the speaker components for the best possible sound. The MATRIX-2000 is designed for easy operation, as you do not need to tweak frequencies or finesse complicated compressor settings. To set-up the system simply connect the XLR right and left signal cables, speaker cables and powercord and you’re ready to perform!
Mobile DJ • Karaoke • Nightclub, Restaurant, Bar Installation • Corporate Audio / Video n Home Entertainment System • Live Sound System • Stage Monitoring System • Booth Monitoring System n Drum Monitoring
Built-in 1200-watt three-channel amplifier
The 18” subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the cast-framed, 4” voice coil, 18” subwoofer. The rear chamber houses all of the system’s electronic circuitry, which includes the amplification for all three components, power supply, compressor and preamps. The 18” subwoofer has a power handling capability of 600 watts and a nominal impedance of 8 ohms.
Transporting the System
Move the subwoofer onto its casters and place the included cover over the subwoofer. Next, pull the included covers over the satellite speakers and close the zippers. It is recommended that you transport the subwoofer and satellites separately. You may transport all the components at the same time by placing the satellite speakers onto the subwoofer’s front panel facing down. Secure the satellite speakers to the subwoofer with the included locking strap by fastening it to the bar handles on the side of the subwoofer cabinet.
12” Two-Way Satellites: Pole Mountable, Flyable Or Angled For Use As Stage Monitors
The 12” two-way speakers are loaded with B-52 custom designed 12” loudspeakers and 1“ titanium diaphragm compression drivers, mounted to 900 x 400 constant directivity horns. The speakers are designed to be pole mounted, sit as stage monitors and have built-in (3/8” –16 TPI) flying hardware for permanent installations. The front panel of the two-way speakers are convex so as to fit perfectly on to the subwoofer’s front grille. Each two-way speaker has the power handling capability of 300 watts and a nominal impedance of 4 ohms.