Furman M-8Lx Power Conditioner with Lights
15-amp Power Conditioner with Wall-wart Spacing, 8 Rear Panel Outlets, 1 Front Panel Outlet, and 2 Lights

Protect your gear without breaking the bank! The Furman M-8Lx Merit Series power conditioner offers top-notch protection for your gear, at a price point that won't break the bank - perfect for any rack system. Place an M-8Lx in to the top slot of your rack, and you've got access to eight switched outlets on the rear panel - including wall-wart spacing - to power and protect all your equipment, up to a 15-amp load. To provide discreet illumination of your equipment on stages, in studios, and in other dark places, the M-8Lx features two slide-out, swiveling light fixtures.

You've got a rack for your effects, preamps, tuner...but you're going to plug that straight into the wall? One big spike and your rig is up in smoke. The Furman M-8Lx's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. You'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.

Can't track down where that noise is coming from? Your mix sounding flat? With the M-8Lx's standard level RFI/EMI filtration, you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and nine total outlets, it's enough to power your whole home studio.

Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down. And, the AC power can be a strain on the circuits in your rig. The Furman M-8Lx's standard level protection and filtration keeps the bad stuff out.

When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into the M-8Lx's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

Furman M-8Lx Features at a Glance:
Maximum Output Current: 15 amps
Line Cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug
Operating Voltage: 120VAC 60Hz
Lamps: Two 120V incandescent bulbs, 4 watts each
Spike Protection Mode: Line to neutral
Energy Dissipation: 170 joules
Peak Impulse Current: 12,000 amps
Maximum Continuous Operating Voltage: 130 VAC RMS
Let Through Voltage (@ 125 amps, 8/20uS waveform) 400 volts
Noise Attenuation: Transverse mode: Greater than 23dB, 200Khz to 10 MHz
Dimensions: 1.75" H x 19" W x 7.5" D
Weight: 5.5 lbs.
Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.

Tech Specs
Type: Rackmount
Number of Outlets: 8 x Rear, 1 x Front
Output Current: 15A
Display: LED protection indicator
Lights: Pull-out dimmable incandescent lights
Features: RFI/EMI filtration
Rackmountable: Yes
Power Source: Fixed AC cable
Height: 1.75"
Width: 19"
Depth: 7.5"
Weight: 6 lbs.
Manufacturer Part Number: M8Lx

Furman M8LX (Furman M 8 LX)