Looking for a portable and versatile active speaker for live sound applications? Then look no further than the Mackie Thump215XT 15" Powered PA Loudspeaker System with DSP and Bluetooth, a powerful PA speaker that includes a 2-channel mixer, great for small club/band PA systems, singer/songwriters, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance. The system features four application-specific voicing modes, an outdoor mode, and Bluetooth for streaming, speaker link, and wireless control.
The Thump215XT's mixer features two combo XLR-1/4" mic/line channels with dedicated gain controls, while an XLR output is provided for daisy-chaining additional speakers. A 3.5mm TRS aux input is also available on channel 2 for connecting your favorite portable player. The tough, impact-resistant polypropylene enclosure ensure protection from on-the-road wear and tear. The bottom of the cabinet provides a pole cup for mounting on a speaker pole or stand. Additionally, M10 fly points are included for permanent installation. The angled design allows the speaker to be used as a floor monitor for onstage performance monitoring.
Application-Specific Voicing Modes
Under the hood of ThumpXT is some powerful processing that you can tap into to up your sound quality game. With 4 different application-specific voicing modes, you can instantly optimize your speakers for how you use them at the push of a single button.
Music: Made to enhance pre-recorded music
Live: Great for general sound reinforcement
Club: Provides a low-end punch
Monitor: Optimizes the speaker for use as a floor wedge keeping feedback in check
Indoor / Outdoor
Ever bring your speakers from inside a room to the scary outdoors and wonder why it sounds so different? You're not alone, and lucky for you we've thought of everything. When you set up your system out in the wild, just push the Outdoor Mode button and your lovely, full sound is restored.
Easily stream music directly to the speaker and enjoy the wireless freedom to dance around while playing DJ. And while you’re at it, you can dive into the Thump Connect 2 App and adjust anything from system EQ and Voicing Modes to channel levels and venue-specific presets.
Bluetooth connectivity for streaming, speaker linking, and control
Download the Thump Connect 2 app for complete wireless control
Link 2 ThumpXT loudspeakers for a powerful, wireless, music playback system in both stereo and dual-zone configuration
Flexible Inputs / Outputs
Channel 1 features a combo XLR-1/4" input that accepts mic or line signals
Channel 2 features a combo XLR-1/4" line input plus stereo 3.5mm input
Thru output contains audio from both input channels
Performance for a New Generation
These are the loudest, most powerful, and best sounding Thump loudspeakers ever, and they are ready to take on your most demanding gigs. Completely redesigned from the ground up, Thump has beefier drivers, 1400W Class-D amplifiers, and powerful tools to make your next gig easier than ever.
You've got music playing nice and loud, but it's time for another announcement. Sure, you could mess with your levels every time, but who's got time for that. Simply press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1.
Ever get a little too up close and personal with the microphone only to hear a loud, ear-destroying squeal? That's commonly known as feedback. And it's an unfortunate issue that physics won't change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws.
1400W ultraefficient Class-D amplifier
Built-Like-A-Tank to conquer every gig while lightweight for easy loading
Frequency response: 40 Hz to 20 kHz
Max SPL: 129 dB
15” high-performance woofer
1” compression driver
Outdoor mode optimizes voicing for open air venues
Built-in Feedback Eliminator reduces squeals and out of control rumble
Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives signal
Front LED On/Off switch
Standard pole mount
M10 flypoints for permanent install
Monitor wedge provides optimal angle for use as a floor monitor
Universal power supply
Configuration Active 2-Way
Enclosure Type Bass-Reflex Loudspeaker
Total Power Capacity 1400 W Peak
Amplifier Class Class-D
HF Driver 1 x 1" / 25.4 mm Titanium Dome Compression Driver
MF Driver None
LF Driver 1 x 15" / 381 mm Woofer
Frequency Response 40 Hz to 20 kHz -10 dB
Maximum SPL 129 dB SPL
Audio I/O 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line Input
1 x 1/8" / 3.5 mm TRS Female Unbalanced Line Input
1 x XLR 3-Pin Male Balanced Line Output
Network I/O None
Wireless Connectivity Bluetooth
Parametric EQ None
Semi-Parametric EQ None
Alignment Delay None
Phase Adjustment None
Digital Signal Processing Venue Settings, Voicing Modes
AC Input Power Universal:
100 to 240 VAC, 50 / 60 Hz
AC Power Connector 1 x IEC
Power Consumption 75 W
Mounting 1 x Pole Socket (Bottom)
M10 Fly Point
Handles 1 x Each Side
1 x Top
Dimensions 27 x 17.4 x 14" / 685.8 x 442 x 355.6 mm
Weight 35.1 lb / 15.9 kg
Package Weight 38.785 lb
Box Dimensions (LxWxH) 29.6 x 18.9 x 16.2"
read or post a question