Added to Cart!
Looking for a truly portable and versatile speaker for on-the-go sound applications? Then look no further than the Mackie Thump Go, an 8", portable, battery-powered loudspeaker with a 2-channel mixer and integrated DSP, great for singer/songwriters, busking, small club/band PA systems, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance.
The rear panel features two combo XLR-1/4" mic/line channels with dedicated gain controls, while an XLR output is provided for daisy-chaining additional speakers. For quick and easy setup, the integrated DSP provides four speaker mode presets (Music, Live, Monitor, and Sub). Simply select your application for the best sound.
Additionally, channel two can pair with any Bluetooth device for audio streaming and there is a link button, which will connect two Thump Gos together for stereo operation. Other features include an indoor/outdoor mode button, music ducking, which lowers the music volume when using a microphone, feedback extermination, and an LED on/off button which controls the LED on the front of the speaker.
Advanced Powered Loudspeaker
8" high-output woofer
1" titanium dome compression driver
Next-generation system protection and thermal limiting keep your system safe
Quick One-Button Speaker Mode Selection
For application-specific voicing
Music: Full-range mode with focus on increased bass and brilliant high frequencies. A great place to start for most DJ / music playback applications
Speech: Features low-frequency roll-off to mitigate thumps and adds boost and sparkle to midrange and high frequencies. This plug-and-play mode is great for singer/songwriters
Monitor: Features a low-frequency roll-off and a reduction around 2 kHz to ensure maximum gain before feedback in monitor applications.
Sub: Rolls off the low end of the Thump Go loudspeaker to match properly with the DRM18S subwoofer (sold separately).
Features 2 channels with Mackie Wide-Z inputs
Handles anything from mics to guitars to mixers with a single twist of the gain knob
Great for the singer/songwriter, plug in and leave the mixer at home
XLR output for daisy-chaining additional speakers
Bluetooth audio streaming
Bluetooth Link for connecting an additional Thump Go for stereo operation
Music ducking for lowering volume of music when using a mic
Portable PA System
Speaker Configuration 1 x 2-Way Loudspeaker
Number of Input Channels 2 (1 x Mono, 1 x Stereo)
Amplifier Power Rating 200 W Peak
Amplifier Class LF:
Enclosure Type Bass-Reflex
HF Driver 1 x 1" / 25.4 mm Polymer Compression Driver
LF Driver 1 x 8" / 203.2 mm Woofer
Crossover 2 kHz
Input Pad None
Semi-Parametric EQ None
Dynamic Processing Limiter, Peak Limiter
Frequency Response 57 Hz to 20 kHz -10 dB
Maximum SPL 115 dB
Coverage Angle 90° H x 60° V
Protections Output Limiter, RMS, Thermal
Audio I/O 2 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Mic/Line Input
1 x XLR 3-Pin Male Balanced Line Thru
Network I/O None
Wireless Connectivity Bluetooth
AC Input Power Universal:
100 to 240 VAC, 50 / 60 Hz
Power Consumption 150 W
AC Power Connector 1 x IEC
Construction Material Metal Grille, Polypropylene
Dimensions 18 x 9.1 x 11.2" / 457.2 x 231.1 x 284.5 mm
Weight 17.6 lb / 8 kg